4400 SERIES
POU Water Cooler
Cabinet
Cold-rolled 20 gauge embossed steel with baked on acrylic enamel finish.
Driptray
Lift out design, which can be connected to mains drainage. High impact durable plastic. Removable anti splash grid.
Taps
Modern push and hold solenoid taps replace the old fashioned manual taps. The push and hold action prevents leaving the tap running by mistake whilst operating as a safety tap at the same time.
New HygieneGuard Tap Cover
The spouts of the solenoid taps are protected by the New HygieneGuard tap covers. Their silver impregnation is designed to prevent hand to tap bacterial contamination. Hand to tap contamination is the most critical area (by comparison the “waterside” is much less critical). The HygieneGuard tap cover can easily be replaced.
Cup Holder
Integrated cup holder to fit 7oz and 9oz cups (Available on floor standing models only)
Removable lower front panel
Spring loaded lower front panel. Remove drip tray and simply press down to remove entire lower front panel for easy access.
Refrigeration System
Quiet, air cooled static-type condenser. No fan required. Protected against motor overload. Unit hermetically sealed. R-134a refrigerant.
Cooling System
Stainless steel 3 Litre cold water tank. Thermostatically controlled from 4-12 degrees Celsius.
Heating System
Stainless Steel 2 Litre tank. 430 watt instantaneous heating. Bimetal temperature control. Designed to prevent total drainage for heating element protection. Easily accessible hot water tank drain at the back of cooler.
Power supply
220 Volt, 50/60Hz. 3 pin plug and 180 cm power cord.
Dimensions
Floor standing: H 117.5cm W 34cm D 34cm
Benchtop: H 47cm W 34cm D 34cm
The Range
WCPC4400X: Floor standing Cook & Cold
WCPH4400X: Floor standing Hot & Cold
WCPTC4400X: Table top Cook & Cold
WCPTH4400X: Table top Hot & Cold
AA 3300X SERIES
POU Water Cooler
Cabinet
Cold-rolled 20 gauge embossed steel with baked on acrylic enamel finish.
Driptray
Lift out design, which can be connected to mains drainage.
High impact durable plastic. Removable anti splash grid.
Taps
Push type. Made of high impact durable ABS. Easy to remove and clean.
Cup Holder
Integrated cup holder with exposed locking nuts to open up for easy refilling of cups. (Available on floor standing models only)
Removable lower front panel
Spring loaded lower front panel. Remove drip tray and simply press down to remove entire lower front panel for easy access.
Refrigeration System
Quiet, air cooled static-type condenser. No fan required.
Protected against motor overload.
Unit hermetically sealed. R-134a refrigerant.
Cooling System
Stainless steel 3 Litre cold water tank.
Thermostatically controlled from 4-12 degrees Celsius.
Heating System
Stainless Steel 2 Litre tank. 430 watt instantaneous heating. Bimetal temperature control. Designed to prevent total drainage for heating element protection. Easily accessible hot water tank drain at the back of cooler.
Power supply
220 Volt, 50/60Hz. 3 pin plug and 180 cm power cord.
Dimensions
Floor standing: H 117.5cm W 34cm D 34cm
Benchtop: H 47cm W 34cm D 34cm
88 SERIES
High Capacity Water Cooler
Cabinet
Cold-rolled 20 gauge embossed steel with baked on acrylic enamel finish.
Driptray
Lift out design, which can be connected to mains drainage. High impact durable plastic. Removable anti splash grid.
Taps
Modern push and hold solenoid taps replace the old fashioned manual taps. The push and hold action prevents leaving the tap running by mistake whilst operating as a safety tap at the same time.
New HygieneGuard Tap Cover
The spouts of solenoid taps are protected by the new HygieneGuard tap covers. Their silver impregnation is designed to prevent hand to tap bacterial contamination. Hand to tap contamination is the most critical area (by comparison the “waterside” is much less critical). The HygieneGuard tap cover can easily be replaced.
Cup Holder
Integrated cup holder to fit 7oz and 9 oz cups (Available on floor standing models only)
Removable lower front panel
Spring loaded lower front panel. Remove drip tray and simply press down to remove entire lower front panel for easy access.
Refrigeration System
Quiet, air cooled static-type condenser. No fan required. Protected against motor overload. Unit hermetically sealed. R-134a refrigerant.
Cooling System
Stainless steel, hermetically sealed 1.9 litre Direct Chill/ Pressure Tank, thermostatically controlled 5c-7c. High volume/ high performance, heretcially sealed Compressor, using R134a refrigerant.
Power supply
220 Volt, 50/60Hz. 3 pin plug and 180 cm power cord.
Dimensions
Floor standing: H 1180mm W 340mm D 34cm
Weight 25kg
Desk top: H 460mm W 340mm D 340mm
Weight 16kg
The Range
Available in Floorstanding and Desk Top
Marco Eco boiler
Automatic fill tap dispense atmospheric water boilers
Marco Eco boilers are designed and manufactured using recyclable parts for both easy and environmentally friendly end of life disposal while also boasting best in class energy efficiency.
- • Energy efficient water boiler
- • Ecomode operation
- • 5 Litre immediate draw off
- • Compact footprint
- • Plumbed into mains supply
- • Excellent value for money
- • Easy to descale and service
- • Electronic control
Model T5 Tap
Dimensions
H x W x D (mm): 350 x 210 x 465
T (mm): 185
D1 (mm): 170
Power rating @ 230V: 2.8 KW
Output per hour: 28 Litres
Immediate draw off: 5 Litres
Cups per hour: 156
